Market leading

Painting & Finishing

RMS offers a wide range of products with a comprehensive range of finishes

ALI: Aluminium

Available for Dado, Skirting and Flush Floor Trunking

Please add /ALI to your part number

BR: Brass

To standard ASTM B121 / B121M-16

Recommended for internal decorative light duty floor solutions

Available for Cavity & Screed Floor Boxes

Please add /BR to your part number

BZP: Bright Zinc Plate

To standard ASTM A123/A123M – 15

Standard finish available for Cable Basket

Please add /BZP to your part number

CH: Chrome

Recommended for a slick clean finish

Available for Grommets

Please add /CH to your part number

PC: Powder Coated

To standard BS EN 13438: 2013

Recommended for interior use although the extra coating in conjunction with the galvanising process does make it non corrosive to a higher standard than the basic PG. You can select your finish in a BS or RAL colour number. Great solution when you have aesthetic considerations. Standard white RAL colour is 9003 unless otherwise stated

Available for Cable Basket, Tray, Trunking, Lighting Trunking, Floor boxes, Dado and Skirting

Please add /PC to your part number

HDG: Hot Dipped Galvanised

To standard ISO 1461

Recommended for both indoor and outdoor installation and especially more aggressive and corrosive conditions

Available for Cable Basket, Tray and Trunking. All HDG trunking is only available in 2m lengths

Please add /HDG to your part number

MG: Magnelis

An innovative metallic coating that offers protection in the harshest environments.

Available for Cable Trunking and Tray

Please add /MG to your part number

PG: Pre-Galvanised

To standard BS EN 10346: 2015

Recommended for non corrosive interior installation i.e datacentres

Available for all Cable Trunking, Tray and Basket

Please add /PG to your part number

SS: Stainless Steel

Grade to standard BS EN 10088-1: 2014

Recommended for external use, food or chemical areas. 304 or 316 available (except floor boxes – only 304). You will be supplied 304 unless otherwise stated

Available for Cable Basket, Tray, Trunking, Conduit and Floor Boxes

Please add /SS to your part number

WP: WeatherProof

Recommended for external installations, especially where a non-corrosive and ingress resistant finish is required

Available for Single and Multi Compartment Cable Trunking

Please add /WP to your part number

CPC: Clear Polyester

Meets the full requirements of BS6496/7

Clear Polyester Coating is recommended for use in both interior and exterior applications. It is established as an alternative to the traditional post-galvanising process

Uses of CPC finish include installation in corrosive atmospheres such as chemical plants, battery rooms, marine environments or general outside use where post galvanised or stainless steel systems have been commonly specified in the past. In such installations, CPC offers a more cost effective solution when combining the factors of mechanical performance, ease of installation and endurance

Please add /CPC to your part number

Professional Cable Management Advice

Call the sales team on 01264 335 558